Integrating 5S and Kaizen Principles for Enhanced Quality Improvement: A Pharmaceutical R&D Laboratory Case Study
Abstract
Purpose: This study aims to investigate the combined application of 5S and Kaizen methodologies in a pharmaceutical R&D laboratory to determine their impact on enhancing quality improvement processes and operational efficiency.
Methodology/Approach: The research adopted a single case study approach in a Greek pharmaceutical R&D laboratory. Quantitative data were gathered on deviations in analysis and experiment conduction times, while qualitative insights were derived from semi-structured interviews conducted with laboratory personnel before and after implementing the methodologies.
Findings: The study revealed significant improvements in laboratory operations following the implementation of 5S and Kaizen. Quantitatively, there was a notable reduction in analytical errors and experiment conduction times. Qualitatively, enhancements were observed in the workspace's organisation, equipment use efficiency, and employee engagement.
Research Limitation/Implication: Focusing on a single laboratory may not fully represent the diverse environments of other pharmaceutical R&D settings.
Originality/Value of paper: This paper contributes to the limited literature on using 5S and Kaizen in pharmaceutical R&D laboratories. It demonstrates the practical benefits of these methodologies in a highly regulated environment and provides a structured approach for their implementation.
Full text article
References
Aktar Demirtas, E., Gultekin, O.S. and Uskup, C., 2023. A case study for surgical mask production during the COVID-19 pandemic: continuous improvement with Kaizen and 5S applications. International Journal of Lean Six Sigma, 14(3), pp.679–703. https://doi.org/10.1108/IJLSS-02-2022-0025.
Al Smadi, S., 2009. Kaizen strategy and the drive for competitiveness: challenges and opportunities. Competitiveness Review: An International Business Journal, 19(3), pp.203–211. https://doi.org/10.1108/10595420910962070.
Al-Qudah, K.A.M., 2012. The Impact Of Total Quality Management On Competitive Advantage Of Pharmaceutical Manufacturing Companies In Jordan. Perspectives of Innovation in Economics and Business, 12(3), pp.59–75.
Baptista, A., Abreu, L. and Brito, E., 2021. APPLICATION OF LEAN TOOLS CASE STUDY IN A TEXTILE COMPANY. Proceedings on Engineering Sciences, 3(1), pp.93–102. https://doi.org/10.24874/PES03.01.009.
Bellgran, M., Kurdve, M. and Hanna, R., 2019. Cost driven Green Kaizen in pharmaceutical production – Creating positive engagement for environmental improvements. Procedia CIRP, 81, pp.1219–1224. https://doi.org/10.1016/j.procir.2019.03.297.
Berenson, M., Levine, D., Szabat, K.A. and Krehbiel, T.C., 2013. Basic business statistics: Concepts and applications. 3rd ed. Frenchs Forest, Australia: Pearson Higher Education.
Bessant, J.R., 2003. High-Involvement Innovation: Building and Sustaining Competitive Advantage Through Continuous Change. 1st ed. Chichester, West Sussex, England: Wiley.
Bevilacqua, M., Ciarapica, F.E., De Sanctis, I., Mazzuto, G. and Paciarotti, C., 2015. A Changeover Time Reduction through an integration of lean practices: a case study from pharmaceutical sector. Assembly Automation, 35(1), pp.22–34. https://doi.org/10.1108/AA-05-2014-035.
Cherqaoui, F.E. and Elhaq, S.L., 2022. The impact of lean practices on workspace improvement: case study of a quality control laboratory in a pharmaceutical company. International Journal of Logistics Systems and Management, 43(4), pp.484–500. https://doi.org/10.1504/IJLSM.2022.127923.
Chiarini, A., 2020. Industry 4.0, quality management and TQM world. A systematic literature review and a proposed agenda for further research. The TQM Journal, 32(4), pp.603–616. https://doi.org/10.1108/TQM-04-2020-0082.
Chountalas, P.T. and Lagodimos, A.G., 2019. Paradigms in business process management specifications: a critical overview. Business Process Management Journal, 25(5), pp.1040–1069. https://doi.org/10.1108/BPMJ-01-2018-0023.
Chountalas, P.T. and Tepaskoualos, F.A., 2019. Selective integration of management systems: a case study in the construction industry. TQM Journal, 31(1), pp.12–27. https://doi.org/10.1108/TQM-03-2018-0028.
Deshpande, S.P., Damle, V.V., Patel, M.L. and Kholamkar, A.B., 2015. Implementation of '5S' technique in a manufacturing organisation: A case study. International Journal of Research in Engineering and Technology, 04(01), pp.136–148. https://doi.org/10.15623/ijret.2015.0401023.
Dixit, A., Routroy, S. and Dubey, S.K., 2019. An efficient drug warehouse operations: An application of 5S. AIP Conference Proceedings, 2200(1), p.020005. https://doi.org/10.1063/1.5141175.
Džubáková, M. and Kopták, M., 2017. Work Standardisation in Logistics Processes. Quality Innovation Prosperity, 21(2), pp.109–123. https://doi.org/10.12776/qip.v21i2.880.
El-Sherbiny, N.A.K., Elsary, A.Y. and Ibrahim, E.H., 2017. Application of the 5S-KAIZEN Approach in Improving the Productivity and Quality of the Healthcare System: An Operational Research. Journal of Patient Safety & Quality Improvement, 5(4), pp.594–600. https://doi.org/10.22038/psj.2017.9468.
Fam, S.F., Prastyo, D.D., Loh, S.L., Utami, S. and Yong, D.H.Y., 2018. Total productive maintenance practices in manufacture of electronic components & boards industry in Malaysia. Journal of Telecommunication, Electronic and Computer Engineering, 10(2–8), pp.97–101.
Geijo, F., 2000. Quality management in analytical R&D in the pharmaceutical industry: Building quality from GLP. Accreditation and Quality Assurance, 5(1), pp.16–20. https://doi.org/10.1007/s007690050003.
Goetsch, D.L. and Davis, S.B., 2016. Quality management for organisational excellence: Introduction to total quality. 8th ed. Upper Saddle River, NJ.: Pearson.
Gunawan, F.X.C., Fauzi, A., Worabay, E., Hafat, S.E.D. and Nasution, Y.I., 2022. Role of Kaizen work culture as moderating work quality and productivity improvement. Dinasti International Journal of Management Science, 3(6), pp.1003–1014. https://doi.org/10.31933/dijms.v3i6.
Gupta, S. and Jain, S.K., 2014. The 5S and kaizen concept for overall improvement of the organisation: a case study. International Journal of Lean Enterprise Research, 1(1), pp.22–40. https://doi.org/10.1504/IJLER.2014.062280.
Haekal, J., 2023. Application of Six Sigma and KAIZEN Techniques to Non-Conformities: A Case Study of Pharmaceutical Companies. International Journal of Scientific and Academic Research, 3(2), pp.1–11.
Hammami, S., Hmida, F., Gharbi, H., Salah, A.B. and Hamouda, C., 2022. Implementation the "5S-Kaizen-TQM" approach into public Hospital in Tunisia. La Tunisie Médicale, 100(7), pp.503–513.
Hyland, P.W., Di Milia, L. and Sloan, T.R., 2004. CI tools and techniques : are there any differences between firms? In: Proceedings of the 5th International CINet Conference. Sydney, Australia.
Irwansyah, D., Harahap, M.R.F., Erliana, C.I., Abdullah, D., Sari, A., Siregar, N., AchmadDaengs, G.S., Indahingwati, A., Sumartono, E. and Wilujeng, S., 2019. Improvement Suggestion Performance of Blowing Machine Line 4 with Total Productive Maintenance (TPM) Method at PT. Coca-Cola Amatil Indonesia MedanUnit. In: Journal of Physics: Conference Series. IOP Publishing. p.012053.
Ishijima, H., Nishikido, K., Teshima, M., Nishikawa, S. and Gawad, E.A., 2020. Introducing the "5S-KAIZEN-TQM" approach into public hospitals in Egypt. International Journal of Health Care Quality Assurance, 33(1), pp.89–109. https://doi.org/10.1108/IJHCQA-06-2018-0143.
Islam, M.S., Samad, M.A. and Islam, T., 2019. Implement Kaizen Tool 5S to Improve Workplace Condition and Pave Way for Lean Management at a Selected Pharmaceutical Factory. In: International Conference on Engineering Research and Education. Sylhet, Bangladesh. pp.1–6.
Jaca, C., Viles, E., Paipa-Galeano, L., Santos, J. and Mateo, R., 2014. Learning 5S principles from Japanese best practitioners: case studies of five manufacturing companies. International Journal of Production Research, 52(15), pp.4574–4586. https://doi.org/10.1080/00207543.2013.878481.
Jiménez, M., Romero, L., Domínguez, M. and Espinosa, M. del M., 2015. 5S methodology implementation in the laboratories of an industrial engineering university school. Safety Science, 78, pp.163–172. https://doi.org/10.1016/j.ssci.2015.04.022.
Kanamori, S., Shibanuma, A. and Jimba, M., 2016. Applicability of the 5S management method for quality improvement in healthcare facilities: A review. Tropical medicine and health, 44(21), pp.1–8. https://doi.org/10.1186/s41182-016-0022-9.
Karam, A.-A., Liviu, M., Cristina, V. and Radu, H., 2018. The contribution of lean manufacturing tools to changeover time decrease in the pharmaceutical industry. A SMED project. Procedia Manufacturing, 22, pp.886–892. https://doi.org/10.1016/j.promfg.2018.03.125.
Karvounis, N.D., 2021. Lean Application: An Assessment of 5S on Employee Attitudes and Productivity. Norfolk , VA, United States: Old Dominion University.
Koromyslova, E., Steinlicht, C., Hall, T., Yordanova, A. and Garry, B., 2018. Implementing Lean Practices in an Academic Department: A Case Study. In: 2018 ASEE Annual Conference & Exposition Proceedings. [online] 2018 ASEE Annual Conference & Exposition. Salt Lake City, Utah: ASEE Conferences. p.30623. https://doi.org/10.18260/1-2--30623.
Kotvitska, A., Lebedynets, V. and Karamavrova, T., 2019. The PDCA cycle implementation at the internal audit process of quality management systems of pharmaceutical companies. The Pharma Innovation Journal, 2(2), pp.709–713.
Lestari, D., Subroto, A. and Kewirausahaan, J.M., 2022. Performance Efficiency of Quality Control Laboratory through Implementation of Lean Operation. Jurnal Manajemen dan Kewirausahaan, 24(1), pp.64–72. https://doi.org/10.9744/jmk.24.1.64-72.
Macpherson, W.G., Lockhart, J.C., Kavan, H. and Iaquinto, A.L., 2015. Kaizen: a Japanese philosophy and system for business excellence. Journal of Business Strategy, 36(5), pp.3–9. https://doi.org/10.1108/JBS-07-2014-0083.
Maharjan, S., 2011. Implementing the 5S Methodology for the Graphic Communications Management Laboratory at the University of Wisconsin-Stout. PhD Thesis. University of Wisconsin–Stout.
Mallick, A., Kaur, A. and Patra, M., 2013. Implementation of 5S in pharmaceutical laboratory. International Journal of Pharmaceutical Research and Bio-Science, 2(1), pp.96–103.
Mazumder, B., Bhattacharya, S. and Yadav, A., 2011. Total quality management in pharmaceuticals: a review. International Journal of PharmTech Research, 3(1), pp.365–375.
Nguyen, N., Nguyen, C., Nguyen, H. and Nguyen, T.A.V., 2021. The impact of quality management on business performance of manufacturing firms: The moderated effect of Industry 4.0. Quality Innovation Prosperity, 25(3), pp.120–135. https://doi.org/10.12776/qip.v25i3.1623.
Nishal, M., Ramprasad, K., Theja, A.A., Saravanan, S.A. and Abishek, S., 2018. Need for total productive maintenance in SME and barriers in implementing TPM in SME. International Journal of Mechanical and Production Engineering, 6, pp.15–20.
Oakland, J.S., 2014. Total Quality Management and Operational Excellence. 4th ed. London, UK: Routledge.
Pačaiová, H. and Ižaríková, G., 2019. Base Principles and Practices for Implementation of Total Productive Maintenance in Automotive Industry. Quality Innovation Prosperity, 23(1), pp.45–59. https://doi.org/10.12776/qip.v23i1.1203.
Patel, V.C. and Thakkar, H., 2014. Review on implementation of 5S in various organisation. International Journal of Engineering Research and Applications, 4(3), pp.774–779.
Qin, S., Duan, X., Fatehallah Al-hourani, A. and Alsaadi, N., 2022. Evaluation of Total Quality Management in Turkish Pharmaceutical Companies: A Case Study. Sustainability, 14(16), p.10181. https://doi.org/10.3390/su141610181.
Sallam, M., Allam, D. and Kassem, R., 2024. Improving Efficiency in Hospital Pharmacy Services: An Integrated Strategy Using the OCTAGON-P Framework and Lean 5S Management Practices. Cureus, 16(3), p.e56965. https://doi.org/10.7759/cureus.56965.
Setiawan, S., 2021. A Systematic Literature Review of Total Productive Maintenance On Industries. Performa: Media Ilmiah Teknik Industri, 20(2), pp.97–108.
Singh, J. and Singh, H., 2015. Continuous improvement philosophy – literature review and directions. Benchmarking: An International Journal, 22(1), pp.75–119. https://doi.org/10.1108/BIJ-06-2012-0038.
Souza, F.F. de, Corsi, A., Pagani, R.N., Balbinotti, G. and Kovaleski, J.L., 2021. Total quality management 4.0: adapting quality management to Industry 4.0. The TQM Journal, 34(4), pp.749–769. https://doi.org/10.1108/TQM-10-2020-0238.
Sugiyama, H., Ito, M. and Masahiko, H., 2015. Process-based method for reducing product losses in pharmaceutical manufacturing. In: Proceedings of 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering. Computer Aided Chemical Engineering. pp.2189–2194.
Teshome, M., 2018. The Effect of Kaizen Implementation on Employees' Affective Attitude in Textile Company in Ethiopia. International Journal of Industrial and Manufacturing Engineering, 12(9), pp.1185–1189.
Voss, C., Tsikriktsis, N. and Frohlich, M., 2002. Case research in operations management. International Journal of Operations & Production Management, 22(2), pp.195–219. https://doi.org/10.1108/01443570210414329.
Weitzel, J., Pappa, H., Banik, G.M., Barker, A.R., Bladen, E., Chirmule, N., DeFeo, J., Devine, J., Emrick, S., Hout, T.K., Levy, M.S., Mahlangu, G.N., Rellahan, B., Venema, J. and Workman, W., 2021. Understanding Quality Paradigm Shifts in the Evolving Pharmaceutical Landscape: Perspectives from the USP Quality Advisory Group. The AAPS Journal, 23(6), p.112. https://doi.org/10.1208/s12248-021-00634-5.
Wickens, P.D., 1990. Production management: Japanese and British approaches. In: IEE Proceedings A (Physical Science, Measurement and Instrumentation, Management and Education). pp.52–54. https://doi.org/10.1049/ip-a-2.1990.0007.
Zadry, H.R. and Darwin, R., 2020. The Success of 5S and PDCA Implementation in Increasing the Productivity of an SME in West Sumatra. In: IOP conference series: materials science and engineering. Medan, Indonesia: IOP Publishing. p.012075.
Authors
Copyright (c) 2024 Charalambos Binellas, Panos Chountalas, Anastasios Magoutas, Natalia Chatzifoti
This work is licensed under a Creative Commons Attribution 4.0 International License.
This is an open access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the BOAI definition of open access. This journal is licensed under a Creative Commons Attribution 4.0 License - http://creativecommons.org/licenses/by/4.0.
Authors who publish with the Quality Innovation Prosperity agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.