Application of SPC in Short Run and Small Mixed Batch Production: Case of Bakery Equipment Producer
Abstract
Purpose: The purpose of this paper is to present preliminary research in statistical process control (SPC) of short run and small mixed batches (SR-SMB) at the organization producing bakery equipment.
Methodology/Approach: The starting point of the research is a literary survey of possibilities of using SPC for SR-SMB and analysis of the current state of production in a particular organization. Through Pareto analysis, verifying the normality of the data obtained during eleven months, calculation of process capability and performance it was possible to prepare control charts. Finally, the single-case study shows that the proposed control charts are applicable in a small batch and mixed production in the organization producing bakery equipment.
Findings: Through SPC implementation in bakery equipment SR-SMB production it is possible to understand the behaviour of the process and to organize better and control the production of expensive precision components.
Research Limitation/implication: Limitation of the research is that data have not been reviewed by individual machines and the impact of individual machines and their settings is not displayed separately.
Originality/Value of paper: Using SPC in the bakery equipment industry is far from common practice. The article presents the first part of the research, which is the starting point for more detailed analysis needed to optimize the use of materials, energy and environmental consequences.Full text article
References
Brännmark, M., Langstrand, J., Johansson, S., Halvarsson, A., Abrahamsson, L. and Winkel, J., 2012. Researching Lean: Methodological Implications of Loose Definitions. Quality Innovation Prosperity, 16(2), pp. 35-48. https://doi.org/10.12776/qip.v16i2.67.
Cullen, J., 1987. The Use of Statistical Process Control in One - Off and Small Batch Production. Chicago, s.n.
Foster, G., 1988. Implementing SPC in Low Volume Manufacturing. ASQC Annual Quality Congress, Dallas TX, 42(0), pp. 261-267.
ISO, 2017. International Standard 7870-8: Control charts – Part 8: Charting Techniques for Short Runs and Small Mixed Batches. Geneva: ISO.
Jarošová, E. and Noskievi?ová, D., 2015. More Advanced Methods of Statistical Process Control. Prague: Grada Publishing.
Juhászová, D. and Či?ka, M., 2018. Measurements and Data Processing in Short Run Small Batch Mixed Production. In: Faculty of Materials, Metallurgy and Recycling Technical University of Košice, Metallurgy Junior 2018 Proceedings. Herľany, Slovakia, 10-11 May 2018. Košice: Technical University of Košice.
Juhászová, D. and Zgodavová, K., 2017. Short Run Small Batch Mixed Production Statistical Process Control. In: Faculty of Materials, Metallurgy and Recycling Technical University of Košice, Metallurgy Junior 2017 Proceedings. Košice: Technical University of Košice.
Lee, W. and Lau, H., 1999. Factory on Demand: The Shaping of an Agile Production Network. International Journal of Agile Management Systems, 2(1), pp. 83-87. https://doi.org/10.1108/14654659910280901.
Nuget, B., 1990. SPC in Short Run Processes Productivity. Dayton: Quality Systems.
QI-Macros, 2018. QI Macros SPC Software for Excel. [online] Denver: KnowWare International. Available at: < https://www.qimacros.com/ > [Accessed 26 November 2018].
Tošenovský, F., 2010. A Mathematical Model for Process Cycle. Quality Innovation Prosperity, 14(1-2), pp. 64-71.
Zgodavova, K. 1995. Contribution toward the Total Quality Management of Piece and Small Batch Production. Ph. D. Technical University of Košice.
Authors
This is an open access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the BOAI definition of open access. This journal is licensed under a Creative Commons Attribution 4.0 License - http://creativecommons.org/licenses/by/4.0.
Authors who publish with the Quality Innovation Prosperity agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.